Wholesale Joggers Buying Guide: Fabric, Fit, and Set Matching
The Three Layer 8801 Fleece Joggers run 8.8 oz (298 GSM) in a 70/30 cotton-poly fleece, sized XS to 3XL with a waist range of 28 to 40 inches. That single weight class covers screen printing, embroidery, and DTF, and the same fabric matches the P280 pullover hoodie for a coordinated set. This guide covers how to read a jogger spec sheet, how to pick a fit, which decoration methods work on fleece bottoms, and how to build a matching hoodie-and-jogger program without adding SKUs.
Why Fabric Weight Matters More on Joggers Than on Tees
A jogger has to drape through the leg, hold a crease at the ankle cuff, and survive a screen print or embroidery hit without puckering. Too light and the leg clings and shows every seam. Too heavy and the garment loses movement and runs hot. Under the fleece weight bands we use across our catalog, light fabric runs under 7 oz, mid runs 7 to 10 oz, and heavy starts at 10 oz and up. The 8801 sits at 8.8 oz, which places it in the core midweight range for fleece bottoms, heavy enough for a structured leg silhouette and a stable screen printing platen, light enough for four season wear.
Fleece bottoms behave differently than a flat tee body because the fabric has to move with the wearer at the knee and hip while still holding its shape at rest. A 70/30 cotton-poly blend gives the 8801 a smoother face than a heavily brushed 50/50 fleece, which helps ink and thread sit cleanly instead of sinking into a deep nap.
How to Read a Jogger Spec Sheet
Three numbers matter on a jogger spec sheet, and none of them are optional to check before you commit to a bulk order.
- Fabric weight (oz or GSM): determines drape, warmth, and how the leg holds a crease. The 8801 is 8.8 oz, 298 GSM.
- Fiber blend: higher cotton content prints and embroiders cleaner. The 8801 is 70 percent cotton, 30 percent polyester, which balances a smooth print face with the shape retention polyester adds at the knee.
- Waist and size range: joggers are sized and measured differently than a tee or hoodie. Read on for how the 8801 chart works.
Waist Sizing and Fit: What “XS to 3XL” Actually Means
Jogger size charts are built around waist circumference and outseam length rather than the chest and body length columns used on a tee or hoodie chart. The 8801 runs XS to 3XL with a waist range of 28 to 40 inches around the body. When you are quoting a size run for a client, confirm the waist measurement against the actual chart rather than assuming the letter sizes line up with a tee size run, since a jogger XS and a tee XS are not built to the same proportions.
For programs that need a youth option in the same fabric, the Y5501 Youth Fleece Jogger Pant uses the identical 70/30 fleece as the adult 8801, sized Youth XS to XL. Youth XS through M ship without a drawstring as a child safety measure, so factor that into any youth program that expects a drawstring waist across the full size run.
8801 Waist and Size Chart
The 8801 chart uses waist circumference (measured around the body) and outseam length, the same two columns used on the 7770 Fleece Shorts chart, rather than the chest and body length columns you would see on a hoodie or tee. Use waist circumference, not a flat waist measurement, when you are converting a client’s existing size run to Three Layer sizing.
| Size | Waist (inches around) |
|---|---|
| XS | 28 |
| S | 30 |
| M | 32 |
| L | 34 |
| XL | 36 |
| 2XL | 38 |
| 3XL | 40 |
Waist sizes increase by roughly two inches per step from XS at 28 inches to 3XL at 40 inches, which gives a screen printer or brand a predictable grading pattern to plan a size run around, whether the program is weighted toward mid sizes or spread evenly across the full range.
Choosing Joggers by End Use
Weight and fit selection for a jogger program should follow how the garment will actually be worn and decorated, not just what looks good on a spec sheet.
- Matching hoodie-and-jogger sets: 8.8 oz, both the 8801 and the P280 hoodie share this weight so a set reads as one fabric.
- Screen printed leg graphics: 8.8 oz and a 70/30 blend give a smooth, stable print surface without the heavier nap of a thicker brushed fleece.
- Embroidered hip or thigh logos: 8.8 oz supports a clean stitch with a medium weight cut-away stabilizer, without requiring heavy-duty needles.
- Youth programs and school uniforms: the Y5501 in the same 70/30 fabric, with the drawstring safety exception on the smallest youth sizes.
Decoration Methods That Work on Fleece Joggers
Fleece bottoms are not a flat, easy substrate, and the leg shape changes what works compared to a tee or hoodie body.
Screen printing
Standard flat platens do not work on a jogger leg. Screen printing on fleece bottoms calls for a sleeve or leg platen so the leg can be loaded without stretching the fabric out of shape. The 70/30 blend on the 8801 gives a smoother face than a heavier brushed fleece, which helps ink sit on top of the fabric instead of sinking into the nap.
Embroidery
Embroidery reads as a premium, retail-ready finish on joggers and holds up well at the hip or thigh placement. The fleece loft on an 8.8 oz fabric needs a stabilizer backing so stitches do not sink or pucker during the run.
DTF
DTF transfers work on fleece because the design is printed to film first and then pressed on, which is more forgiving of the leg’s texture than printing wet ink directly onto the fabric. It suits smaller runs and multi-color designs that would be slow to set up as screen prints.
For the full technical breakdown of platens, ink chemistry, and heat press settings for fleece bottoms, see the print and decorate joggers and shorts guide.
Set Matching: Building a Jogger and Hoodie Program
Merch companies and brands that want a coordinated top and bottom without carrying two different fabrics have a direct pairing available. The 8801 Fleece Joggers and the P280 Midweight Pullover Hoodie are both built from 8.8 oz, 298 GSM, 70/30 cotton-poly fleece, so a top and bottom ordered in the same color read as one fabric and one hand feel, not two mismatched pieces from different mills. Matching the fabric and weight across a set also means one ink and stabilizer setup works for both garments, which saves setup time for a decorator running a full program rather than a single style.
Before you commit to a matched run, confirm current color availability on both the 8801 Fleece Joggers product page and the P280 Midweight Pullover Hoodie product page, since colorways can shift between drops. If you want the two pieces bundled as a single set order, the Wholesale Sweatsuits set pairs the P280 top with the 8801 bottom under one listing.
Frequently Asked Questions
What weight fleece is best for wholesale joggers?
8.8 oz (298 GSM) is the standard for wholesale jogger programs. It is heavy enough to hold a leg crease and support screen printing or embroidery, without the bulk that slows down four season wear. The 8801 Fleece Joggers are built at this weight in a 70/30 cotton-poly fleece.
What size range do the 8801 joggers cover?
The 8801 runs XS to 3XL with a waist range of 28 to 40 inches around the body. Always check the waist measurement column rather than assuming the letter size matches a tee or hoodie size run.
Is there a youth version in the same fabric?
Yes. The Y5501 Youth Fleece Jogger Pant uses the same 70/30 fleece as the adult 8801, sized Youth XS to XL. Sizes XS through M ship without a drawstring as a child safety feature.
Can I match joggers to a hoodie in the same fabric and color?
Yes. The 8801 Fleece Joggers and the P280 Midweight Pullover Hoodie share the same 8.8 oz, 298 GSM, 70/30 cotton-poly fleece, so ordering both in the same color gives you a matched set from one fabric rather than two different mills.
There is no minimum order on standard stock. In-stock paid orders placed by 12pm PT ship the same day. Custom production runs on a 120 day lead time. Every garment is made at our own WRAP certified factory.
Browse the full jogger lineup and current color availability on our wholesale joggers category page.