Wholesale Screen Printing Blanks — Rated Excellent Across the Full Line
Every blank in Three Layer’s screen printing collection carries an excellent print rating — not because we grade on a curve, but because each garment is engineered from yarn selection through finishing specifically for the demands of commercial screen printing. If you run a print shop, decorate for brands, or supply blanks to decorators, this is the category where every SKU on the shelf performs.
Screen printing is unforgiving. A mediocre blank might look fine on a hanger, but put it on a platen under a 156-mesh screen and the problems show up fast: fibrillation through the ink film, dye migration on darks, shrinkage that shifts registration between flashes, pilling that breaks down the print after a few washes. Our blanks are selected and tested to eliminate those failure modes before they reach your production floor.
What Makes a Blank “Excellent” for Screen Printing?
We evaluate every Three Layer garment against the criteria that matter to working print shops:
Surface smoothness: Tight knit gauge and ringspun or combed yarns create a flat substrate that accepts ink evenly without micro-voids or texture interference.
Dimensional stability: Controlled shrinkage means your registration holds from first pull to last, and the finished garment doesn’t distort after the customer’s first wash.
Ink adhesion: Cotton and high-cotton blends absorb plastisol and water-based inks into the fiber structure, producing prints that flex with the fabric instead of sitting on top and cracking.
Flash tolerance: Fabrics that withstand repeated flash curing without scorching, yellowing, or moisture-related defects like dye sublimation on poly blends.
Color consistency: Lot-to-lot dye uniformity so your underbase and ink colors look the same whether you are printing 48 pieces or 4,800.
For a deep dive into which blanks perform best by decoration method and print technique, read our guide: Best Blank Hoodies for Screen Printing — A Decorator’s Guide
The Full Screen Printing Blanks Collection
Nine styles, every one rated excellent. From lightweight tees to heavyweight fleece, there is a Three Layer blank for every print job in your queue.
T-Shirts
Premium Cotton Tee 1003 — 5.3 oz, 100% combed cotton. The workhorse blank for high-volume print runs. Soft hand, tight knit, and pure cotton construction means zero dye migration on any colorway. Ideal for retail-quality branded merch and event tees.
100% Heavy Cotton Tee 1005 — 6.0 oz, 100% ringspun cotton. When your client wants a tee with substance. The heavier weight holds oversized prints without sagging, and the ringspun surface produces crisp detail down to fine halftone dots.
Hoodies & Sweatshirts
Midweight Hoodie P280 — 8.8 oz, 70/30 cotton-poly. The all-season print shop staple. Brushed fleece interior, smooth outer face, and enough weight to support large front and back prints without bleed-through.
Heavyweight Urban Hoodie 15001 — 12 oz, 80/20 cotton-poly. Premium streetwear-grade fleece. Dense enough for multi-color overprintswith minimal underbase, and the 80% cotton face takes ink like a natural fiber blank.
Pullover Hoodie 5108 — 80/20 cotton-poly fleece. A reliable mid-range hoodie that bridges casual and streetwear. Clean front panel and set-in sleeves give printers a generous, uninterrupted print area.
Full Zip Hoodie 5109 — 80/20 cotton-poly with a ringspun cotton face. The zip-front format is popular for left-chest prints, back panels, and sleeve hits. The cotton face yarn ensures excellent ink lay-down despite the blended construction.
Midweight Crewneck CR280 — 8.8 oz, 70/30 cotton-poly. Same proven fabric as the P280 hoodie in a clean crewneck silhouette. The flat front panel is a screen printer’s favorite — no hood seams or drawstrings to work around.
Bottoms
Fleece Shorts 7770 — Cotton-poly fleece shorts built for the same print standards as our tops. Left-leg and right-leg print placement works cleanly, and the fleece surface accepts ink with the same consistency as our hoodie line.
Premium Fleece Joggers 8801 — Cotton-poly fleece joggers with a smooth outer face. Large thigh-panel prints, leg hits, and all-over patterns all perform well on this fabric. A strong add-on for brands building full decorated collections.
Built for the Print Shop — Sold Wholesale Only
Three Layer sells exclusively to decorators, brands, and resellers through our NuOrder wholesale portal. Browse the full screen printing collection, check real-time inventory by color and size, and order at wholesale pricing. No minimums on stock colors. Custom color programs available at 600 pieces — reach out to our sales team to get started.
Wholesale Screen Printing Blanks — Rated Excellent Across the Full Line
Every blank in Three Layer’s screen printing collection carries an excellent print rating — not because we grade on a curve, but because each garment is engineered from yarn selection through finishing specifically for the demands of commercial screen printing. If you run a print shop, decorate for brands, or supply blanks to decorators, this is the category where every SKU on the shelf performs.
Screen printing is unforgiving. A mediocre blank might look fine on a hanger, but put it on a platen under a 156-mesh screen and the problems show up fast: fibrillation through the ink film, dye migration on darks, shrinkage that shifts registration between flashes, pilling that breaks down the print after a few washes. Our blanks are selected and tested to eliminate those failure modes before they reach your production floor.
What Makes a Blank “Excellent” for Screen Printing?
We evaluate every Three Layer garment against the criteria that matter to working print shops:
Surface smoothness: Tight knit gauge and ringspun or combed yarns create a flat substrate that accepts ink evenly without micro-voids or texture interference.
Dimensional stability: Controlled shrinkage means your registration holds from first pull to last, and the finished garment doesn’t distort after the customer’s first wash.
Ink adhesion: Cotton and high-cotton blends absorb plastisol and water-based inks into the fiber structure, producing prints that flex with the fabric instead of sitting on top and cracking.
Flash tolerance: Fabrics that withstand repeated flash curing without scorching, yellowing, or moisture-related defects like dye sublimation on poly blends.
Color consistency: Lot-to-lot dye uniformity so your underbase and ink colors look the same whether you are printing 48 pieces or 4,800.
For a deep dive into which blanks perform best by decoration method and print technique, read our guide: Best Blank Hoodies for Screen Printing — A Decorator’s Guide
The Full Screen Printing Blanks Collection
Nine styles, every one rated excellent. From lightweight tees to heavyweight fleece, there is a Three Layer blank for every print job in your queue.
T-Shirts
Premium Cotton Tee 1003 — 5.3 oz, 100% combed cotton. The workhorse blank for high-volume print runs. Soft hand, tight knit, and pure cotton construction means zero dye migration on any colorway. Ideal for retail-quality branded merch and event tees.
100% Heavy Cotton Tee 1005 — 6.0 oz, 100% ringspun cotton. When your client wants a tee with substance. The heavier weight holds oversized prints without sagging, and the ringspun surface produces crisp detail down to fine halftone dots.
Hoodies & Sweatshirts
Midweight Hoodie P280 — 8.8 oz, 70/30 cotton-poly. The all-season print shop staple. Brushed fleece interior, smooth outer face, and enough weight to support large front and back prints without bleed-through.
Heavyweight Urban Hoodie 15001 — 12 oz, 80/20 cotton-poly. Premium streetwear-grade fleece. Dense enough for multi-color overprintswith minimal underbase, and the 80% cotton face takes ink like a natural fiber blank.
Pullover Hoodie 5108 — 80/20 cotton-poly fleece. A reliable mid-range hoodie that bridges casual and streetwear. Clean front panel and set-in sleeves give printers a generous, uninterrupted print area.
Full Zip Hoodie 5109 — 80/20 cotton-poly with a ringspun cotton face. The zip-front format is popular for left-chest prints, back panels, and sleeve hits. The cotton face yarn ensures excellent ink lay-down despite the blended construction.
Midweight Crewneck CR280 — 8.8 oz, 70/30 cotton-poly. Same proven fabric as the P280 hoodie in a clean crewneck silhouette. The flat front panel is a screen printer’s favorite — no hood seams or drawstrings to work around.
Bottoms
Fleece Shorts 7770 — Cotton-poly fleece shorts built for the same print standards as our tops. Left-leg and right-leg print placement works cleanly, and the fleece surface accepts ink with the same consistency as our hoodie line.
Premium Fleece Joggers 8801 — Cotton-poly fleece joggers with a smooth outer face. Large thigh-panel prints, leg hits, and all-over patterns all perform well on this fabric. A strong add-on for brands building full decorated collections.
Built for the Print Shop — Sold Wholesale Only
Three Layer sells exclusively to decorators, brands, and resellers through our NuOrder wholesale portal. Browse the full screen printing collection, check real-time inventory by color and size, and order at wholesale pricing. No minimums on stock colors. Custom color programs available at 600 pieces — reach out to our sales team to get started.
